Needle Non Thrust Roller Bearings

Contact Now

The most economical type of needle roller bearing is a full-complement of loose needle rollers assembled directly between a hardened and ground shaft and housing. Generally, hardened end washers provide axial location. This type appears in many applications such as those where a hardened and ground gear bore serves as the outer raceway.

When application requirements are met and assembly is not difficult, a full complement of rollers forms a bearing of small cross section and high load capacity. It is the lowest-cost rolling bearing per pound of capacity, and is of particular advantage where production rates justify automated assembly equipment.

Needle rollers come in several end configurations. Controlled contours have also been developed to reduce roller-end stress concentrations from misalignment or deflection of one or both raceways under load. Controlled contour refinement brings more uniform stress distribution and optimum bearing performance.

0.813 Inch | 20.65 Millimeter x 1.063 Inch | 27 Millimeter x 0.5 Inch | 12.7 Millimeter IKO YB138 Needle Non Thrust Roller Bearings

25 ~ 50 Single
Yes (with retaining 70

0.625 Inch | 15.875 Millimeter x 0.813 Inch | 20.65 Millimeter x 0.75 Inch | 19.05 Millimeter IKO YB1012/MF3 Needle Non Thrust Roller Bearings

Deep Groove Ball Bea Available
Black Oxide Coating Double

0.688 Inch | 17.475 Millimeter x 0.875 Inch | 22.225 Millimeter x 0.75 Inch | 19.05 Millimeter IKO YB1112/MF3 Needle Non Thrust Roller Bearings

8 Clear Anodize
Yes (with retaining Single

1.5 Inch | 38.1 Millimeter x 2.063 Inch | 52.4 Millimeter x 1 Inch | 25.4 Millimeter IKO BR243316 Needle Non Thrust Roller Bearings

6006 Bearings with Housin
[Steel] Steel Flanged Pilot Type
1/13