- AMERICAN NTN BEARING MFG.CORP.
- Angular Contact Ball Bearings Cam Follower and Track Roller - Stud Type Cam Follower and Track Roller - Yoke Type
English
- Address9515 Winona Avenue, Schiller Park, lL 60176, U.S.A.
- Phone(Working Time)671-5268
Needle Non Thrust Roller Bearings
Contact NowThe most economical type of needle roller bearing is a full-complement of loose needle rollers assembled directly between a hardened and ground shaft and housing. Generally, hardened end washers provide axial location. This type appears in many applications such as those where a hardened and ground gear bore serves as the outer raceway.
When application requirements are met and assembly is not difficult, a full complement of rollers forms a bearing of small cross section and high load capacity. It is the lowest-cost rolling bearing per pound of capacity, and is of particular advantage where production rates justify automated assembly equipment.
Needle rollers come in several end configurations. Controlled contours have also been developed to reduce roller-end stress concentrations from misalignment or deflection of one or both raceways under load. Controlled contour refinement brings more uniform stress distribution and optimum bearing performance.
| Bearing Number | Bore Dia | Outer DIa | Width | Size |
|---|---|---|---|---|
| 0.984 Inch | 25 Millimeter x 1.26 Inch | 32 Millimeter x 1.024 Inch | 26 Millimeter IKO TLA2526Z Needle Non Thrust Roller Bearings | -8.1 mm | Stamped Steel | 2.540 mm | 1.44 |
| 0.787 Inch | 20 Millimeter x 1.024 Inch | 26 Millimeter x 0.787 Inch | 20 Millimeter IKO TLA2020Z Needle Non Thrust Roller Bearings | Grade 0 | Thrust Ball | Flat | Standard |
| 0.866 Inch | 22 Millimeter x 1.102 Inch | 28 Millimeter x 0.63 Inch | 16 Millimeter IKO TLA2216Z Needle Non Thrust Roller Bearings | 200 °C | 32 mm | 23.05 mm | 28.5 mm |
| 0.984 Inch | 25 Millimeter x 1.26 Inch | 32 Millimeter x 0.63 Inch | 16 Millimeter IKO TLA2516Z Needle Non Thrust Roller Bearings | 0.4 Hz | 3 mm | 2.5 mm | 2.01 |